Specifications |
|---|
| Method of Measurement: | Loss on drying via four infrared quartz cylinders |
| Modular configuration: | Control and Heater modules (Optional: up to 4 heater modules) |
| Temperature setting/control: | 30-210o C in one degree increments via RTD sensor， +/- 1oC |
| Temperature steps: | Programmable one or two with selectable ramp rate |
| Standby temperature: | 30-160o C in one degree increments with selectable equilibration time |
| Temperature display: | Display of both target and current temp at each stage of testing and standby |
| Conserve mode clock: | Programmable time by day of week to shut down and wake up analyzer |
| Balance module design: | Monolithic weighing cell with protective stainless steel cover |
| Balance calibration: | Internal calibration weight or external weights accepted for manual calibration |
| Ideal weight: | Audio and visual display for programmable target sample weight addition |
| Target limit alert: | Minimum and maximum programmable limits and screen alert when test done |
| Program storage: | 300 programs with unique settings， alphanumeric naming |
| Result storage: | 999 results with statistics: Average， SD， RSD， high and low |
| Units of measure of results: | Weight， %Moisture， %Solids， %Volatiles， Fuel Moisture， PPM， mg/L |
| Endpoint determination: | Actual slope， Calculation and Time modes |
| Sample ID: | Numeric， incremental， alphanumeric or turned Off |
| Modes of operation: | Standard test， Syringe， "Splash" method or Concentration modes |
| Security mode: | Selectable setup and operation protection with numeric code |
| Graph mode: | Graph of temperature and percentage over time |
| Display: | Quarter VGA with contrast adjustment (black on white or white on black) |
| Keypad: | Sealed membrane with audible tactile feedback |
| Internal printer: | Built-in thermal， 40 character graphic with selectable format |
| Power requirements: | 90-250 VAC 50/60 Hz self adjusting power supply |
| Dimensions (L x W x H): | 16.25'' x 19.5'' x 9.25''， shipping weight 35lbs (includes one heater module) |
| Warranty period: | 2 years， complete parts and labor |
